Zapi AC-2 Manual de Serviço descarregar pdf (Página 94)

- Important adjustments -

Accelerator pedal adjustment:

1. Opening Zapi display.

2. Connect to the DUAL MASTER (03)

3. Press ENTER to go into the general menu.

4. Press ROLL UP or ROLL DOWN button until

PROGRAM VACC. appear on the display.

5. Press ENTER to go into the PROGRAM VACC.

6. The display will show the minimum and

maximum values of potentiometer wiper output.

7. Press ENTER to clear these values.

8. Select forward direction, close any interlock

switches that may be in the system.

9. Slowly depress the accelerator pedal to its max.

value.

10. The new minimum and maximum voltages will be

displayed on the console an arrow indicating the

direction, push OUT and YES.

11. Repeat from point 8 in reverse direction.

12. When finished, press OUT and ENTER to confirm.

Lift poti adjustment:

1. Opening Zapi display.

2. Connect to the AC2 or AC3 (05)

3. Press ENTER to go into the general menu.

4. Press ROLL UP or ROLL DOWN button until

PROGRAM VACC. appear on the display.

5. Press ENTER to go into the PROGRAM VACC.

6. The display will show the minimum and

maximum values of potentiometer wiper output.

7. Press ENTER to clear these values.

8. Slowly pull the “lift” lever completely back.

9. The new minimum and maximum voltages will be

displayed on the console.

12. press OUT and ENTER (With the lever pulled) to

confirm.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 145 146

Sem comentários

Zapi AC-2 Manual de Serviço Página 94