Zapi AC-2 Manual de Serviço descarregar pdf (Página 103)

103

- 15/18/20BT-7, 16/18/20B-7 Traction Master (03) setup.

Code

SET MODEL

(service level)

CONNECTED TO

Code

SET OPTIONS

(Service level)

125

HOUR COUNTER

121

BATTERY CHECK

245

TRACTION CUTOUT

244

LIFT CUTOUT

246

S. R. O.

251

HYDRO KEY ON

KEY ON

Values

OFF

ON : if this option is programmed "ON" the traction inverter

manages an external hydraulic steering function when the "key" is switched ON.

ON: the battery discharge level check is carried out; when the battery level reaches 10% the traction

maximum current is reduced to the half of the programmed value. Traction speed/current is also reduced

(optional) and lift function is disabled(optional). At key on if battery is below 10% lift function is allowed

for 10-20 seconds

OFF: the battery discharge level check is carried out but no alarm is signalled.

ON : when the “Battery low” alarm appears, and this option is programmed "ON", the traction speed is

reduced to 60 Hz.

ON : When the “Battery low” alarm appears, and this option is programmed "ON" the lift function is

disabled.

When S.R.O. option is set to "OFF" allowed sequences are:

Key -> direction lever -> pedal

Key-> pedal -> direction lever within the SEQUENCE DELAY TIME.

No sequence is requested on the seat switch.

When S.R.O. option is set to "ON" allowed sequences are:

Key -> seat -> direction lever -> pedal

seat -> key -> direction lever -> pedal

Key-> seat -> pedal -> direction lever within the SEQUENCE DELAY TIME.

seat -> Key-> pedal -> direction lever within the SEQUENCE DELAY TIME.

The SEQUENCE DELAY TIME is adjustable.

When pedal or direction levels are active at key on traction shows INCORRECT START.

When incorrect sequence is detected traction shows SEQUENCE FAULT.

Parameter explanation.

RUNNING: the counter registers travel time only. KEY ON: the counter registers when the "key" switch is

closed.

Parameter explanation.

Values

Code 3 = Connected with Master controller (selection which controller you want to con.)

OFF

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 145 146

Comentários a estes Manuais

Sem comentários

Zapi AC-2 Manual de Serviço Página 103

Comentários a estes Manuais

Manuais e produtos relacionados com Adaptadores e conversores de corrente Zapi AC-2